2023 Exmark 60" Zero Turn Mower, Kawa FX921V, Lazer Z X Series, Ultracut Series 6 Deck

Description

With options to meet the needs of the most demanding landscape maintenance professionals, our top-rated Exmark Lazer Z X-Series zero-turn mowers represent the state-of-the-art in commercial mowers. Cutting deck options include our massive 96-inch UltraCut Flex Wing cutting deck and select models equipped with our exclusive cut quality enhancing Adapt Technology. Choose from rugged commercial-grade engines, including high-efficiency Electronic Fuel Injection (EFI) options equipped with our exclusive EGov and RED Technology, which can boost fuel efficiency by up to 41%. Lazer Z X-Series zero-turn mower models are available with UltraCut Series 6 decks in 52-, 60-, and 72-inch cutting widths, with or without Adapt Technology, or the 96-inch UltraCut Flex-Wing rear discharge cutting deck.
Regardless of the combination you choose for your Exmark Lazer Z zero-turn mower, you'll ride in unmatched comfort thanks to our full-suspension seating system and smooth, easy-to-use controls that offer precision maneuverability. And from a long-term value standpoint, nothing beats the Exmark Lazer Z X-Series mower. It's the perfect combination of power, productivity, and durability. That's why it's our top-of-the-line gasoline-powered mower and should be at the top of your list.

Features

UltraCut Series 6 Deck
This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)

Adapt Your Cut
Achieve an optimal cut in a wider variety of conditions with our exclusive Adapt Technology. Adjust deck rake without tools, from the operator seat, to customize deck performance. Available on select 2023 Lazer Z X-Series models.

A New Level of Comfort
Comfort increases productivity. That's why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.

Tool-less Belt Removal
Deck and hydro belt can be installed without using any tools.

Oil Guard System
The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.

Patented RED Technology
Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.

Productivity
Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.

Specs

• Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
• Drive Tires 24 x 12.0-12, 4-ply Turf MasterRegistered
• Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
• Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
• Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
• Parking Brake Lever-actuated disc brake.
• Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
• Electrical 12-volt battery with 15-amp alternator.
• Engine Kawasaki FX921V
• Engine Series V-Twin
• Air Filter Heavy-duty canister air filtration system
• Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
• Drive Hydro-Drive
• Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
• Speed Infinitely variable speed selection from 0-11.5 mph (18.5 kmph) forward, 0-6.0 mph (11.3 kmph) reverse
• Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
• Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
• ROPS 2-post foldable ROPS standard with seat belt and latch.
• PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
• Drive Wheel Release Allows unit movement without engine running.
• Casters .50" thick caster yoke arms.
• Width / Cutting Deck 60"
• Deck Style Floating Deck
• Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
• Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
• Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
• Blades 3 Blades at 20.50" Length
• Width 72.8 in. (184.9 cm)
• Length 83.1 in. (211.1 cm)
• Height 70 in. (177.8 cm)
• Curb Weight 1218